Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
FWIW back in the factory Subi days, we looked at the carbon hoods and deck lids, the ones that were nicely finished weighed much more than the stock aluminum ones. The Tiger hood has all the right vents, but is race quality meaning it looks like...
Looks like I got a lot of tires to try! I'll likely be making the switch from 3Rs to R7s for a track event in June at VIR. But as for time trials, I'll be looking at everything suggested in here so far. Appreciate the feeback so far everyone...
Yes the stock tank has a Venturi to siphon from the passenger side of the tank into the fuel hat, but the flow rate is much less than the pump flow rate. Only designed to allow you to run the tank down to empty putting around in your Hertz rental...
Son dropped by yesterday with the boys.............I was a little worried they might not remember ole gumpy grandpa after 6 plus wks, but those fears were completely unwarranted...........They were as happy to see me as I was happy to see...
Sure thing. I used this as a base for my designMines super quick and dirty, but effective. Made out 1/4in thick angle ironfor the hinges, I used 1/2in solid rod inside a thick tube with 1/2ID
As some of you know, I've started the Tire Guy Mafia ( https://www.tireguymafia.com/ ) to help out some of those in the sport. So I've never tried to overstate my position, because on any day you can get your butt kicked by the most unlikely...
A little late to the thread, this is still a work in progress, it's coming along. I've been to 7 HPDE track weekends over the last several year, only drove all 8 sessions twice. the latest was last month at V.I.R. Fuel system issues cut that...
Well...... RA did not go as planned.Last year at Autobahn the car needed to be jumped between sessions. I would work just fine however once it was off it would need to be jumped again to get it back.Fast forward to last weekend. I bought a...
I will say this, Hoosier R7s are a whole lot different now than even 4 years ago. A set of Hoo Hoos will last 25 heat cycles (If rotated and have proper -3.0+ camber up front) and hold lap time. This is 15 cycles better than the old compound...
You did warn everyone on the event thread. I just didn't think it would be as disorganized as it was. Tech admitted they only cared about tire date codes, glass, and helmet certifications. I guess MCA was calling the shots on this one. They...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.