The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

JRi rear coilover install

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Does anyone know the torque value for the JRi rear coilover bolts? I think the ones for the KONIs are different and they are the only ones I can find on their website. When I was torquing down the bolts the spacer split.62330D38-976F-4E2B-8A5F-A9A4DA1A2111.jpeg3A118C76-6C95-4237-871B-FECBF5FD4B2C.jpegDECC47A8-856A-4161-87A2-08A2F7E643EE.jpeg199304FC-7163-4C63-BD96-3825659BCF54.jpeg
 
Last edited:
I used the spacer from the old coil overs and everything bolted up as it should. The new spacer’s hole diameter is too large, slid over the internal joint and cracked. I wish I would have checked the top but it torqued down fine. I would recommend checking this part if you have the same set.1A710456-52D9-4EAE-BB88-566FA3039728.jpeg902A91F7-87B2-4E81-8463-5AB2E2D7E057.jpeg291E5C95-F8BD-4BCE-B0EA-91023CAEDB52.jpeg29FDF718-0721-474F-BCBC-DD165489327C.jpegF49AEECC-61BF-4819-9B62-2F5E61F9DC5C.jpeg
 

TMO Supporting Vendors

Top