New Ford Performance 5.0L/5.2L GT500 Aluminum Oil Pan and Pump Kit

[Mjschneidy]

Got some decent weather finally to get the car out for a break-in cruise on the motor. Hot oil pressure at idle is 25psi

 

[Scootsmcgreggor]

Anyone know if Stainless Works headers fit with this pan? I know ARH does, and Kooks does not, but unsure beyond that. Thanks!

 

[Brazos609]

View attachment 57682

Kooks headers for reference.

View attachment 57683

Snug but it looks like Kooks clear the pan. Being a primary tube it looks like they clear the pan as long as thermal expansion wouldn't result in contact.

 

[Scootsmcgreggor]

Snug but it looks like Kooks clear the pan. Being a primary tube it looks like they clear the pan as long as thermal expansion wouldn't result in contact.

thanks. @JeffV8 had to clearance his pan for kooks headers so manufacturing variance seems to be the determinant for kooks fitting or not.

 

[JeffV8]

thanks. @JeffV8 had to clearance his pan for kooks headers so manufacturing variance seems to be the determinant for kooks fitting or not.

 

[Scootsmcgreggor]

Picked up some used Pypes headers, they fit by miles. For anyone searching in the future.

 

[blueboss302]

Just wanted to confirm that we can use our oem boss windage tray and don't need to swap over to a gt500 one. We can use our oem one,right?


Thank you

 

[mwjscn]

We can use our oem one,right?

The M-6675-M52S kit comes with a brand new one, which is the same BR3Z-6710-A part number that was used in the GT and Boss 5.0 S197s (later used on the Coyote S550s until they went to the plastic oil pan and brought back for use with the S550 GT500). So if you have a customized oil-scraper type, you can carry it over without issue, or if you have a stock one just throw in the new fresh one that comes with the package.