The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

SCMC Full Throttle Fall Fest at VIR November 11 - 12, 2017

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

898
544
All,

The SCMC Full Throttle Fall Fest will be at VIR November 11 - 12, 2017. This is one of my favorite vents of the year. I, along with a number of other TMO members, am already registered.

The cost is $550.00 for two days or $275.00 for one day. If you mail in your registration before October 22, 2017 you will receive a $55.00 discount and receive a free T-shirt. You can also register online at:

https://www.motorsportreg.com/events/tcusa-full-throttle-fall-fest-virginia-international-raceway-track-club-usa-695034

More information may be found on the SCMC forum at:

http://www.svtcobraclub.com/forums/showthread.php?t=19442

unnamed.jpg
 
Run Group Rules –
Red Group – Anywhere on track where the wheels are straight with optional point by.
Blue Group – Anywhere on track where the wheels are straight with mandatory point by. Orange Group – Mandatory point by with 5 straights
Green Group - Mandatory point by with 3 straights
 
Thanks Tom- Replacing my radiator tonight, think I developed a little fracture after my off-track at CMP, either that or it was just time to go. It's the stock one and always worked fine but replacing it with a 3 Row aluminum. I'll shake it down Saturday, going to a open house / car show at Pro Dyno in Fort Mill. Have you ever done anything with them?
 

7500RPM_Ben

TMO Clueless
Thanks Tom- Replacing my radiator tonight, think I developed a little fracture after my off-track at CMP, either that or it was just time to go. It's the stock one and always worked fine but replacing it with a 3 Row aluminum. I'll shake it down Saturday, going to a open house / car show at Pro Dyno in Fort Mill. Have you ever done anything with them?

Pro-Dyno= NO. Too many people with two many problem come from there. I know people that have been through multiple motors with those guys. Fastlane Motorsports in Benson, NC or Kurgan's in GA are the only ones I would go to. The Mustang Shop in Greer, SC I think remote tunes through Kurgan. That is about it, I have heard Schrader is good as well.
 

TMO Supporting Vendors

Top