- Thread starter
- #181
Re: Auto-Blip Install and Instruction Information
Here's my final mounting position. At first I really didn't want to mount it here but the more I looked at it and played around with it I thought it would work well. There's a small plastic cross member on the 12's (not sure if the 13's are different) and used some 3M VHB velcro to attach the AB. There's a nice opening for the cable to run through. Only issue you'll have in this position is you won't be able to adjust your steering column up any further so make sure it's in the right place if you use this location. The AB does not block any information on the dash.
Also please post up if you're using an AB and I'll update the first post in this thread.
I have:
Jza1736 Jason
pufferfish Steve
DG Darren
Steveespo Steve
LS110 John
thebull ??
reakhavoc Gregg
NFSBOSS Rick
jdasch1 John
DaddyFixer
Boss_302 Doug
wwilde001 William
Nicholas Smither
Anthony Alm
Paul Donatt
Here's my final mounting position. At first I really didn't want to mount it here but the more I looked at it and played around with it I thought it would work well. There's a small plastic cross member on the 12's (not sure if the 13's are different) and used some 3M VHB velcro to attach the AB. There's a nice opening for the cable to run through. Only issue you'll have in this position is you won't be able to adjust your steering column up any further so make sure it's in the right place if you use this location. The AB does not block any information on the dash.
Also please post up if you're using an AB and I'll update the first post in this thread.
I have:
Jza1736 Jason
pufferfish Steve
DG Darren
Steveespo Steve
LS110 John
thebull ??
reakhavoc Gregg
NFSBOSS Rick
jdasch1 John
DaddyFixer
Boss_302 Doug
wwilde001 William
Nicholas Smither
Anthony Alm
Paul Donatt