The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Recent content by Boss2620

  1. Boss2620

    S197 Boss 2620

    This is the Build Thread for Boss 2620. Reply below.
  2. Boss 2620

    Boss 2620

  3. Boss2620

    Exedy clutch

    Well it’s been awhile and I wanted to be sure. The Exedy Stage One (Mach 500) and the Exedy light weight chrome moly flywheel work perfectly. It’s like driving with a stock clutch on the street but without any lockout at any rpm. I also installed the MGW Racespec shifter (standard/ standard) and...
  4. Boss2620

    Exedy clutch

    I'm going with the Stage I (mach 500) and the Exedy lightened flywheel. I've spoke with enough Boss owners that are using that setup, that really like it, so I'm convinced that will work the best for my situation. Actually I've spoken to Boss owners who are using the Mach 500, Mach 600 and the...
  5. Boss2620

    Exedy clutch

    80KM2E did this setup solve the high rpm lockout?
  6. Boss2620

    Exedy clutch

    Gww52 let us know how it works out. Which flywheel will you be using?
  7. Boss2620

    Exedy clutch

    I spoke to Evan Kline at Exedy about a fix for our Boss clutch problem. I explained that the Hyper Single seemed to be the hot setup and asked him what his opinion was. He was familiar with the issue and thought the cause was deflection of the pressure plate housing at high rpm. He didn’t think...
  8. Boss2620

    Clutch pedal failure

    After considering all the options I’m going to go with the Exedy hyper single and the MGW race spec shifter. Now how to pay for it...
  9. Boss2620

    Clutch pedal failure

    I’ve had the car since January 2013 and have had this same problem, although to a lesser degree, since I started tracking it three years ago. With the change in pedal feel a close look at the slave cylinder is in order. There is no loss of fluid in the reservoir so maybe an internal seal leak...
  10. Boss2620

    Clutch pedal failure

    I just returned from Willow Springs and experienced what I am calling clutch pedal fade away. The pedal would starts to develop a low release point and then eventually sticks to the floor. This would happen about 10 to 15 minutes into a 20 minute session and got worse as the day went on. If I...
  11. Boss2620

    S550 track kit experience?

    Hi strengthrehab, I put the ford racing track suspension package on my wife's GTPP and thought it made a huge difference. It reduced body roll, brake dive and made the car feel really planted. It will lower the stance about 1/2" if you start with a performance package car. It will give you a...
  12. Boss2620

    Boss 302 clutch fix?

    I’d like to know if anyone has come up with a real fix for high rpm shifts in the Boss. If I try to shift at 7300 rpm or higher I experience very difficult shifts or complete lockout on either up shifts or downshifts. I’ve read conflicting reports on various clutches and none seem to be the...
  13. Boss2620

    2016 GT PP Lowering Springs

    We put the Ford track suspension package on my wife’s 2015 PP GT and are very happy with the results. Dropped the car an inch, no more brake dive and it corners flat. It’s the suspension that should have come with the performance package.
  14. Boss2620

    **sold** 11-14 Steeda Upper Control Arm & Mount

    I’ve sent payment through PayPal
  15. Boss2620

    **sold** 11-14 Steeda Upper Control Arm & Mount

    I’m interested in the P springs, how can I pay you?
Top