Here's what I found about shavingTrack and Competition DOT Tires The following tires are manufactured with only 4/32" to 4.5/32" of molded tread depth and do not require tire shaving for autocross or track use.BFGoodrich g-Force R1 BFGoodrich g-Force R1-S Hankook Ventus Z214 Hoosier A7...

Ordered MPSC2 tires online and had these two track prep optionsHeat cycling Tire shavingDoes anyone have experience with either of these?

Curious about the additional negative camber. Let us know how it improves you times.

After driving the new set up for about 50 miles, its feeling a lot better. I made some turns that would of been at the limit before. Went threw faster and came out feeling less resistant.

What sway bar settings are you running? I have mine set on the soft setting front and back.

Does anyone know if the air intake sensor is at the mass air flow sensor? My inlet air temp was over 120 in stop and go traffic last night and ambient was only 73. I had some work done on the car the day before and now it looks unusually high. I think it usually used to runs about 5 to 10...

I just had this same set up done. FP sway bars & springs with -2.5 camber in front & rear at -2.1. I've only drove it about 15 miles on the street so far. It feels looser, like it wants to turn. It doesn't pull to one side, just feels like it wants too. Little concerned how it will feel at...

This question has probably been asked but, I couldn't find it. What is the Max negative camber you can get out of the stock gt350 back without aftermarket camber mount adjustment kits?Has anyone tried the Steeda Camber Mount Adjustment Kit Rear 2015-2019?I just installed camber plates this...

I ending up going with the PROJECT 6GR TEN GLOSS BLACK FINISH R-SPEC GT350/GT350R. It came down to these and the P51's. I chose the 6GR TEN because they have more brake clearance, second lightest rims, and they're local.I'm not sure which tires yet. Leaning towards the MSC2's but with petstang...

Have you used the Hoosiers? Your right about not needing a street legal tire but I don't think I can fit a 315 up front?

wow! 3 track days on a set of tires? I wonder if the Goodyear Eagle F1 Supercar 3R hold up better on track. Have you tried any others.

Do you use the tires for track only?

Thanks for the pictures. I just received a set of FP springs, sway bars & Vorshlag camber plates. The tires, & rims are my next move. I was wondering if the 325's would stick out too far but, after seeing your picture it looks like they fit good.

That's awesome. You guys are running the same set up I'm about to make.I've been a little torn between going 315 or 325 in the back. Have you & your friend compared set ups? Is there much of a difference? Also did you notice a difference in acceleration and braking with the light weight rims?

petstang what size tires & rim set up are you running and how long have you been running the P51's?I was looking at these others brands but ran into issues with each oneForgestar doesn't make an 11.5 size 949 are out of stock Forgeline are 5 times the money (I realize apple to oranges)My...