The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

Register Log in
  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

FilxNZ's latest activity

  • FilxNZ
    FilxNZ reacted to honeybadger's post in the thread S550 Honey Badger GT350 Build with Like Like.
    I don't think so. They technically float about 1in off the floor pan and I've never had an issue with water pooling there - even in some pretty wet conditions. The electronics are also IP water resistant, so should be good. But we'll see
  • FilxNZ
    FilxNZ reacted to cortexracing's post in the thread Gen1 CorteX Vintage Build: Project Hatemail with Like Like.
    Yep, should have a pretty sizable update coming soon. The car is currently largely stripped down for finish welding. So, even though we are cruising right along it doesn't "look" that much different than our last update.We do have a new build...
  • FilxNZ
    FilxNZ reacted to steveespo's post in the thread 2024+ Mustang Brake Pads Available NOW with Like Like.
    Let's talk about OP Mustang and what kind of people Tim and Kelly are. As many of you know from Facebook posts, I suffered another engine failure due to a secondary cam timing chain failure on the right bank of my engine. This caused piston to...
  • FilxNZ
    FilxNZ reacted to Kona.coyote5.0's post in the thread S197 The return of Celeste with Like Like.
    This car, Celeste, originally belonged to @Vettel-ish (Andy). Build thread of the car before I owned it is located here: https://trackmustangsonline.com/member-cars/celeste.405/Andy put her up for sale in the summer of 2023 to buy a full blown...
  • FilxNZ
    FilxNZ replied to the thread Mustang Dark Horse track use options.
    While not DH specific there is some good 10R80 cooling info on this site, e.g. this thread. (see full post)
  • FilxNZ
    FilxNZ reacted to Scootsmcgreggor's post in the thread Seperate clutch fluid reservoir with Like Like.
    You can and my brakes felt fine after, but def best to do an abs bleed after. Good motivation to get Forscan IMO, its so easy to use and opens up a whole new world of possibilities. And for damn near free. Not nearly as difficult to use as I...
  • FilxNZ
    FilxNZ replied to the thread Voodoo w/TR-9070 DCT.
    HTG Standalone GCU could be worth exploring. They support BMW (Getrag) DCTs and they do say they will support a variety of transmissions. It seems likely the Tremec inputs are reasonably to another dual clutch trans. (see full post)
  • FilxNZ
    FilxNZ reacted to blacksheep-1's post in the thread Farly's response to a kid getting a new Mustang. with Like Like.
    Farly seems to be a stand up guy.https://fordauthority.com/2024/03/farley-reacts-to-dads-post-about-sons-ford-mustang-story/
  • FilxNZ
    FilxNZ reacted to KazarS197's post in the thread Farly's response to a kid getting a new Mustang. with Like Like.
    That's an awesome gesture. I hope the kid makes it to the track.
  • FilxNZ
    FilxNZ reacted to Mad Hatter's post in the thread Splined Strut Camber Bolts - Why are they splined with Like Like.
    My MM camber plates only took me to -2.5 camber, but with BMR bolts top and bottom it increased to a max of -4.5. Never had a camber bolt slip after several years of racing including knocking a rear wheel off a GT4 with my front. That's with 315...
  • FilxNZ
    FilxNZ reacted to bnight's post in the thread S550 2017 Grabber Blue Mustang GT with Like Like.
    Day in the Shop - 14.03.2024So after last weekend track test I decided to visit my tire shop and install the A052 tires. It was a miserable rainy day and it took me 2 hours to get to the shop was planning to also install the brakes cooling but...
  • FilxNZ
    FilxNZ reacted to Iceman72's post in the thread Official APEX Wheels Showroom Gallery Thread with Like Like.
    18X10's EC-7's squared on Mich Pilot Sports 295/35/18's ST coilovers, -2.5 degrees camber No spacers
  • FilxNZ
    FilxNZ reacted to Bill Pemberton's post in the thread Down Under Party Time! with Like Like.
    Stasik_a4 is 45 years old today, so give a shout out to the Youngster from Down Under on his Birthday as he enters the early days of becoming an old fart ! Happy day and I hope you get some track time in the near future!!Have a great day and...
  • FilxNZ
    FilxNZ reacted to dragoon's post in the thread S550 dragoon ‘21 Mach1 HP with Like Like.
    I enjoy assembling LEGO’s, the Technic category with cars being my favorite. Some of my past builds to cure the winter blues but with spring coming, that will be replaced with the full sized version on some asphalt.
  • FilxNZ
    FilxNZ reacted to KazarS197's post in the thread S197 KazarS197 (Mark's) with Like Like.
    Couldn't help myself and got another Coyote. Finally have a legit tow vehicle. Maybe a trailer next year.
Show older items
Top