The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Recent content by FrenchBoss

  1. FrenchBoss

    Complete CorteX-JRI Coil-over system for 2004 - 2014 Mustang

    Hi AirBoss, was this set up used on track, how many miles on it..Any pic? Thanks
  2. FrenchBoss

    KW 35230845 ClubSport Coilovers Adjustable 05-14 Mustang Used SOLD SOLD

    Re: KW 35230845 ClubSport Coilovers Adjustable 05-14 Mustang UsedHi Road Racer 88, any chance you can send me your info's at : [email protected] I would like to talk regarding your Coil Over. Thanks Stephan
  3. FrenchBoss

    Lapping day at Calabogie Race track

    Hi Guy's, there will be a track day at Calabogie racetrack in Ontario on the 10th of June 2016: http://www.calabogiemotorsports.com/ Organize by The Viper Club of Quebec, this is a great opportunity to discover a great and challenging race track. I am a member and also an Instructor for the VCQ...
  4. FrenchBoss

    Speed Bleeder HELP

    Good enough,,Thanks Stephan
  5. FrenchBoss

    Speed Bleeder HELP

    Thanks AZ Boss .Is it possible that the number ending with 540 is for use with inserts...
  6. FrenchBoss

    Speed Bleeder HELP

    I guy's I just ordered some Russel speed bleeder for my 2012 Boss, from Summit R. I used a part number someone had put on a different post on TMO. Part number I used is 639540, Now I just check that part number and it seem it does not fit on my car. According to Russel I should use part ...
  7. FrenchBoss

    Oil Temp gauge

    Hi Guy's , I am installing a digital oil temp gauge, now I would appreciate a little bit of help with the wiring. i need to find a positive source ( ignition ) any suggestion in the pass fuse box? Also there is a orange wire that is suppose to be plug in a headlight positve signal, since the...
  8. FrenchBoss

    Dipstick accuracy

    Dipstick in the same location, pan is about the same height but much wider. Maybe because I let the OE pan drain for one week before removing it and also took the oil pick up off ( about 1/2 quart drained out of that also. Oil filter stayed on. I didnt even started the car yet...Still winter here.
  9. FrenchBoss

    Dipstick accuracy

    As stated in my previous post (Oil priming) I change my oil pan for the Moroso race unit, after putting about 8.5 quarts in it it already shows full. Now the pan should hold 2 extra quart according to Moroso and they also say that the OE dipstick will work, obviously it will pass the full...
  10. FrenchBoss

    Oil Priming

    Great, thanks to you all :)
  11. FrenchBoss

    Oil Priming

    I had heard this way of doing the priming, I would be scared that the engine would fire up at WOT :o, I guess trusting the electronic's is a must on this one. Is there a fuse or sensor I could unplug, thanks for your help.
  12. FrenchBoss

    Oil Priming

    Hi Guy's, just change my oil pan with a Moroso unit. I would like to bring the oil pressure up before firing the engine Is there an easy way to prime the motor ... Thanks
  13. FrenchBoss

    Another oil pan upgrade post

    Thanks Guy's..Moroso it will be...
  14. FrenchBoss

    Trade or Sale 2012 Boss 302 S grille

    I have a 2012 Boss 302 S grille for sale or trade for a Saleen grille ( Need more cooling on the track) Boss grille is in very good condition but wears a few sign of track days ( not painted) . Pictures available Thanks Stephan
  15. FrenchBoss

    Another oil pan upgrade post

    Thanks for all the good advise guy's. Now as for the KM dropping, any advice or trick on how you proceded to hold the engine in place while replacing the pan :o
Top