The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Recent content by racered302

  1. Accufab 84.5mm TB dyno tested on my 13' Boss

    This was my before, stock tune, and after with a tune. A/F is really lean with kooks LT and h-pipe using the OP set up and yes the venturi was in there before the tune. Something still doesn't seem right. Sort of flat even though it faster, doesn't jerk my head back like it used to...
  2. 2015 Mustang GAINED weight???

    Steeda also said they had 4 cars on the way, they didn't say they had them yet. But, there's always some truth in a rumor.
  3. Installed BOSS LCD Track Apps Cluster

    Justin - I usually find what I need here, http://www.digikey.com/product-search/en?WT.z_header=link . I have know idea what the pins your looking for look like. If you post a pic that would help.Here's another link to a place we use, I couldn't remember their name...
  4. Ticking Sound

    I don't worry about it anymore. One thing I should mention is that it didn't do it until after my first oil change. I think the factory put some kind of additive in there to keep it quite at the dealer. It fine after warm up so I'm not concerned.
  5. Header bolts coming loose

    From what I have read they need to be re-torqued or at least checked after a couple of heat cycles because of the gasket seating itself. I'm not sure if it's necessary if you use Loc-tite, locker bolts or the stage 8 system. The stage 8 look like they could be a royal pain in the ass unless you...
  6. Header bolts coming loose

    I could hear a whoosing when I rolled up the windows and hit the gas. I could hear it on the drivers side.
  7. New personal best!

    I wish I drove my car more, I would ask to be part of the beta testing. I guess that would be more for the track rats. :)
  8. Header bolts coming loose

    I had a shop install the Kook's for me, I didn't have the gahona's to tackle that by myself. I have an appointment to get them torqued down again on Thurs., hopefully for the last time.
  9. Added upper/lower control arms, relo brackets and tires. Something is NOT right!

    You could always save them for the track. Never mind, you'd need a roll bar installed also, your car would be in the 10's with those tires.
  10. Header bolts coming loose

    I was driving on the highway today with the windows up and I heard an exhaust leak coming from the engine bay on the drivers side. When I got where I was going I took a look under the hood and found 1 bolt about to fall out and another I could turn with my fingers. What are you guys doing to...
  11. New HPI 1/10 Mustang RC

    Back in the 90's HPI set the r/c car oval speed record, something like 100+ mph.
  12. MGW Short Throw-Interesting Comment by instructor

    I agree with this statement, timing is on the driver not the mechanical portion of the car. I have yet to drive a car of different make that shifts the same as the other. The car will never adapt to your driving style, it's always the other way around. Some shift shorter with a high clutch, some...
  13. Help with lower control arm bracket decesion

    I swapped my lowers with the one's from CHE, I don't have anymore wheel hop or fish tailing during spirited take offs. I still can't get the power down though, I need more self control. That's the only mod I've done to the suspension.
Top