Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Check out this string on the S197 side, but same issue: https://trackmustangsonline.com/threads/anyone-find-a-fix-for-fuel-sloshing-and-starvation.16346/If you read through enough of it, you'll come across my "2 cents" posts there. I did the... (see full post)
Let's talk about OP Mustang and what kind of people Tim and Kelly are.
As many of you know from Facebook posts, I suffered another engine failure due to a secondary cam timing chain failure on the right bank of my engine. This caused piston to...
Yeah it was a great weekend, but I was disappointed by the lack of organization and some staff commentary in the Friday and Saturday drivers' meetings. Perhaps one of the more significant comments was that open passing in advanced and super...
I finally got in touch with Bob and he had a really bad fall and went into the ER thinking he had blown out his knee. Once there they found out his fall he had actually broken his ankle extremely severe and after a long surgery he has been kept...
I think this might be the history of the engine design.
http://www.wrljet.com/fordv8/indy.html
Man I would have loved to see a video of that beast screaming across the flats!
Listen to the glorious sound in an Indy car.
There is 1 sketchy corner with virtually no runoff. This was an open track day, they have them on Fridays with about 30 cars instead of 100 on Saturday.
I took your advice and ran the intermediate class, and when necessary waved people past. I...
Great news!I developed a fascination for Laguna Seca watching CART and Cam-Am events starting in the 70's. I had to wait until late in life to start my HPDE hobby. Laguna Seca was at the top of my bucket list.After starting with...
I see my post #101 above from 2021. I can confirm (and have since seen others report it), that the S550 6 piston Brembos will bevel pads due to all 3 sets of pistons being the same diameter. Seems to show up more when running on higher speed... (see full post)
I’ll have to take pics but I’ll describe it.https://www.amazon.com/dp/B073GYBVRL?_encoding=UTF8&psc=1&ref_=cm_sw_r_cp_ud_dp_PHFWMQH5CM1XT9B9P7CJI took the winch mount and drilled two holes on the receiver that has 8 holes in it. Then mounted...
I live in Louisiana but have been working in North Carolina. I had to stay over this weekend and thought, let's see what's going on around me. Wouldn't you know it, NASA at CMP!Sounds like a great idea....Only my poor little rental car didn't...
I have never liked the lighting in my garage. Yes, I did the original lighting myself. But never could get it just right. So I took it all down and replaced the old tube lighting with all l.e.d.'s. I played with the lay.out several times til I...
Have you tried the flame wrench? Heat the bearing race with a torch as much as you can, then whack it with a hammer a few times to try to shock the interface of the race to the stub axle. As TMSBoss said, try using a pipe wrench to rotate it free...
Just another option to consider is AJ Hartman spring package. At least you can swap springs rates in and out without buying a whole new set.
You can change ride height and corner balance...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.