The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

Register Log in
  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Recent content by TimK

  1. PP2 wheel offset request

    Have any PPL2 owners pulled wheels to determine offsets?

  2. PP2 wheel offset request

    Cool!From my connections at Ford: 2018's are in build out. June 11 is 2019 Job 1 - early changeover....

  3. PP2 wheel offset request

    Thanks! I/we look forward to your report. Please confirm: Did you buy a PP1 or PP2?

  4. Konig Ultraform 18's fit S550 PP1

    There is/should be more brake clearance with 19's, but is totally dependent on wheel design. Not all 19's will fit (as pointed out elsewhere in this thread). Barrel diameter, spider shape, and offset are critical to be certain tires/wheels don't rub brakes or suspension. Wheel manufacturers...

  5. Konig Ultraform 18's fit S550 PP1

    A reasonable question: Gearing changes in the new M82-D4 (1:1 is 4th) make 2nd a little stiff for AX (1:1 in the M82 is 5th). Shorter tires move the revs into the torque band.

  6. Konig Ultraform 18's fit S550 PP1

    Thanks for your recommendations. I'm back on the hunt.

  7. Konig Ultraform 18's fit S550 PP1

    Thanks for your concern. It's possible there is no such thing as low cost lightweights. Guess I'll look for some PP2 new take offs.....

  8. Konig Ultraform 18's fit S550 PP1

    Last night the following wheels were test fitted on my 2018 PP1:18"x10.5"x25mm offset Konig Ultraform's with 315/30-18 Hoosier drag radials fit over the front calipers with about 1/16" clearance in the corners (lots of clearance over the rears). There's about 3/8" tire clearance from the...

  9. PP2 wheel offset request

    Thanks.Does anyone know if GT350 wheels will fit the 2018 GT PP1?

  10. PP2 wheel offset request

    Offset update: My 2018 PP1 has 19x9x45 front and 19x9.5x52.5 rear.Stigs bald brother posted images of 2015-2016 PP wheels (earlier in this thread) as 19x10.5x30 front and 19x11x62 rear.Are the larger wheels possibly the same as PP2? Please reply if you can confirm.Also: Last night I...

  11. PP2 wheel offset request

    Will one of you 2018 PP2 owner please publish wheel offsets?Thanks,TimK

  12. Square wheels for S550 AX?

    Thanks DocWalt,The result of your input, I'm looking into CAM-C and STP as alternatives. To my surprise, 2017 track times between FS, CAM-C, and STP are much closer than expected:F-Street 45 drivers, Fastest 56.5/61.6 Slowest 69.3/71.6STP 18 drivers, Fastest 55.8/60.6 Slowest 63.1/71.9...

  13. Square wheels for S550 AX?

    From the SCCA rulebook (below), width must be the same as standard. Do you think anyone would argue if the rears are 0.5" narrower than standard?Any type wheel may be used provided it complies with the following:A. It is the same width as standard and as installed it does not have...

  14. Square wheels for S550 AX?

    Thanks for your reply DocWalt; so much for wishful thinking.Re-reading the rules, it says an option must be completed in whole to be legal. I'll take your word that the PP2 is A-Street. A question about the 19X9X45mm Ecoboost wheels: Why wouldn't they be legal? Same exact 19X9X45mm up...

  15. Square wheels for S550 AX?

    New to the forum, I'm an SCCA F-street (former S-197) AX driver looking for wheel recommendations for my new 2018 S550 PP1 car. Square is needed due to frequent rotations needed, but I'm stuck with +/-7mm offset due to SCCA rules. Thankfully, PP2 wheels/tires are legal because it's an option...
See more
Top