Separate names with a comma.
Axle bearings maybe
Tonight, I replaced my screw in ball joints, Rotor rings and front Pads. Then softened up the front sway bar. Button Willow here I come.
Took it on the twisties today, Much better than a Tru-Trac.
Not yet, but it's in the plain.
It takes time but that's about all, I had to re-shim the pinion because it had compressed. Back lash takes time, I hit 12 thou, range is 8-12....
Rebuilding my 8.8. New Torsen T-2R FR500S, Boss302R/S Diff. new bearings and gears. I ended up having to reuse the original gears though, I messed...
Removed the 630lbs H&R spring on the front and installed a 650lbs Eibach spring. What that did was let me use my Multimatic front camber plates...
I went Tracking at Buttonwillow for two days.
This is a good deal !
7 years after a Lotus strike, new bumper cover and valance. Stripes go back on in the morning.
What the Hell, why wait ?
I did not know that.
If I had stock style joints, I would use the Proforged units. And dont forget the inner tie rod as well. It's also replacable....
Here are the requested photos.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
I will as soon as I put them back on.
I use the Kohr 3/4 spacer. With the ET52 offset, there is about 1/8 of a inch stick out at the top give or take, with -2.8 to -3 degrees camber....
Towing is 17,280 lbs at the tongue
I towed My old truck I sold, a 1999 Dakota RT yesterday up to Sacramento. I got 18 miles to the gallon doing 60 even up hill. Yeah, I think I'm...
I found it ! I went back and found a sent email a recovered it.
I know right !