The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

19x10.5 or 11 with 305/35/r19 on all 4

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Norm Peterson

Corner Barstool Sitter
939
712
Exp. Type
HPDE
Exp. Level
5-10 Years
a few miles east of Philly
Just going to bring this back up.
Boss 302, P springs,305/30/19 PS4,ET 52 Apex 19x11.
I use a 20mm front spacer and no rear.
Front fits great, rear is a slight problem though as the rim protector
on the PS4 contacts the bump stop bracket at full droop.
Not extremely hard but touching.This is with the rear centered at ride ht.
If it's only rubbing on the 'bulged' portion with the tiedown hole in it, you can remove that part while still leaving the flat bottom metal in place for the bump stop to contact as necessary.

full.jpg

full.jpg


Norm
 

TMO Supporting Vendors

Top