The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

2013 Boss 302S grille question

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Can anyone provide any close up photos of the grille holes opened up? I'm curious if they went in from the front or ground off the back plastic. Trying to replicate it as cleanly as possible with a factory 302 grille since they are out of stock everywhere.

Thanks.
 
Are you talking about where the faux fog lights are?.....I drilled them out on my Boss with a 5/16 drill bit with the grile on the car and touched up any spots that needed it with a black magic marker, cheap, but effective.......................................;)
 
I thought only the 12's needed to be drilled.....didn't the 13's have removable covers??

'13 has a few of the hexagons opened up that are normally closed on the stock grille.

Boss 302:

dr3z8200cb.jpg

Boss 302S/R:

fms-m-8200-mbra_xl.jpg

I'm trying to figure out of they milled the back of the hexagons off or if they went in from the front with a die grinder.
 

TMO Supporting Vendors

Latest posts

Buy TMO Apparel

Buy TMO Apparel
Top