The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Any 13 Owner Please Help - Need a Quick Stripe Measurement

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Working on a project with ProMotorStripes.

Anybody who has a 13 please take a quick measurement of the fender stripe pictured below. The number 3 should be 23 1/4 and the number 4 should be 8 1/4 inches. I do not have access to 13 for the others right now.

Thanks in advance.

mustang-2013-boss-2_zps0b26d1cb.png
 
Here ya go measurements taken from my 2013:

1 measures 6 1/4

2 measures 14 5/8

3 measures 23 1/4

4 measures 8 1/4 measured parallel to the ground, or 7 5/8 if measured as depicted in your pic (approximately perpendicular to the stripe's centerline)

5 measures 9 1/2 from the outside edge of the stripe to the leading edge do the drivers door

Good luck and hope this helps. Hopefully others will chime in to confirm
 

TMO Supporting Vendors

Top