The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

arp wheel stud part number

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

what are the correct arp wheel stud part numbers your using for the change over.
i have 7703 and 7723 and neither appear there going to work correctly


lol


steve-o
 
Not sure about those part numbers but the fronts are longer than the rears. Here's the Rehagan Ford Racing versions so maybe you can cross check.

http://rehagenracingproducts.com/product.sc?productId=1792&categoryId=-1
 
ok,
front looks like a 7722. .55 knurl.
and its like 3.1 long.
1/2 inch.

the rears ill have to pull one of the studs out and chec k its knurl. it might be the same size.

a 7722 arp is correct for the front though. from everything i can see. the 7723 i have comes in a lil bit "large"

3.700 and a knurl of .600 so that would be a good reason for it not to work. its rated for the 2006 aND up moosethangs btw
 
gremlinsteve said:
ok,
front looks like a 7722. .55 knurl.
and its like 3.1 long.
1/2 inch.

the rears ill have to pull one of the studs out and chec k its knurl. it might be the same size.

a 7722 arp is correct for the front though. from everything i can see. the 7723 i have comes in a lil bit "large"

3.700 and a knurl of .600 so that would be a good reason for it not to work. its rated for the 2006 aND up moosethangs btw

Looks like 7722 and 7723

http://www.maximummotorsports.com/store/index.php?main_page=index&cPath=48_135

I've been looking too in case I need to run a spacer up front but really don't want the studs that long. Even with a 5mm spacer up front there would be tons of unused threading
 
i already have my studs enroute. the ford is just a repackaged arp kit.
shop around and you can get the studs cheaper. by a long ways.
i listed the part numbers so that one may do that now.
 

TMO Supporting Vendors

Top