The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Bay Area Dealer/Shop for IDS Programming?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hey guys, I’ve swapped the Ecoboost drivetrain, wiring, and modules from my 2016 out and replaced with drivetrain, wiring, and modules from a 2020 GT. I suspect the programming in the PCM from the GT May have been corrupted so I’d like to have it re-programmed. Apparently when they are without power for an extended period of time it can happen. For example I’m getting an intermittent engine overtemp warning when accessory power is on but engine not running. Also I have no PATS related DTC’s but it won’t crank over when I try and start it. So want to rule out the PCM configuration. There are some other issues too but I want to get this thing running and then I can tackle the rest.

My backup plan is to go standalone but that’s a last resort.

So anyone know any dealerships or shops with advanced level programmers that might be able to help? My local dealer service manager said he doesn’t have any techs that he would recommend for this.
 
Thanks Byron, left Trent a message this morning.

If anyone has any other ideas or a good experience with programming work at any bay area dealers please let me know!
 

TMO Supporting Vendors

Top