The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Boss 302 Fuel Injectors

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

steveespo said:
Aren't they 47 lb/hr each?
Steve

I don't know. I tried to look it up on the internet, but couldn't find any info.

Another question: At what point would one look to upgrade the fuel injectors concerning intake (cobra jet), tb, and cai mods?
 
Found this information on the Stock Boss 302 Fuel Injectors:

FORD RACING 34 LB/HR FUEL INJECTOR SET
M-9593-LU34A*
This part is no longer available.

34 lb/hr, 4-hole, high-impedance fuel injector with USCAR electrical connector.
Original equipment on 2011-present 5.0L Mustang and Boss 302

Hope this helps those that are contemplating upgrades in the future.
 
1,281
3
Tulsa, OK
Yes, the stock Boss/GT injectors are 34#. Injectors are usually swapped out to 47# for supercharged applications around the 600hp range and for N/A e85 setups. Pushing any higher than 600ish will likely require larger injectors.
 

TMO Supporting Vendors

Top