Selling these take off items for a customer. They all came of a 2012 Laguna Seca, but are not the original LS parts.
Brembo Race brake kit SOLD
Same kit as http://www.chicane23.com/shop/brakes/brembo-14-pro-series-racing-brake-kit-s197-mustang
2 sets of XA2 calipers (4 calipers)-These are the calipers off the pre-2105 Boss S
One red lettered, one black lettered (Black lettered set not pictured. One could us a rebuild as the Aluminum pistons are mushroomed a bit. Complete rebuild from HPE is about $500 for stainless pistons and orings for both calipers. SOLD
6 used 72 vane, 355mm rotors with mounting hats and all hardware- #09930611, 09930621 All 6 have had some hard track time and were being kept as spares. They are all showing heat cracking, but none migrated to edge yet or longer than 1", so it would be at buyers discretion to use them or not. You can see the condition in the pictures. SOLD
2 sets of mounting brackets-#802200, 20.B771.02
Not sure on the different part numbers, but they both locate the caliper correctly over the 355mm rotor. SOLD
1 set of mildly used PFC pads
17mm remaining on pads. #7700.11.25.34 SOLD
Prefer to sell this all as one, but may be willing to split into 2 kits as there are 4 calipers and 4 brackets. Once kit would have 2 rotors/hats and one would sell with 4 rotors/hats. Calipers new msrp for $3700/pr, hats $700/pr, brackets $320/pr-over $12k in brake parts, not including rotors.
GT500 rear brakes with Pagid pads and Blow Fish brackets
Rear GT500 calipers with 60% used brake pads.
Factory GT500 brackets, as well as brand new Blow Fish Racing aluminum brackets ($189)
Brand new in box Pagid RS29 brake pads #E8113 R29 01 ($199)
6 Rotors all used, see pictures for condition
$425/obo
Corsa Axle back exhaust
https://www.americanmuscle.com/corsa-xtreme-axleback-1114gt.html?utm_content=Exhaust - Axleback|Corsa&utm_campaign=AMM 2005-2014 No Years&utm_source=google-pla&utm_medium=shopping&T5_Var3=blue&T5_Var4=100512
$325/obo
PNR welding supercharger/coolant reservoir (drops in spare tire well)
http://pnrwelding.net/s197-mustang-trunk-tank-with-or-without-pump-and-options_40235
$75 tank only
Everything is pictured at the following link
https://www.dropbox.com/sh/zen8djft8esg4a3/AACV6eh8wCNBRiuf0vCfF-zQa?dl=0
Feel free to email me directly at [email protected] or call/text 612-220-5929
Brembo Race brake kit SOLD
Same kit as http://www.chicane23.com/shop/brakes/brembo-14-pro-series-racing-brake-kit-s197-mustang
2 sets of XA2 calipers (4 calipers)-These are the calipers off the pre-2105 Boss S
One red lettered, one black lettered (Black lettered set not pictured. One could us a rebuild as the Aluminum pistons are mushroomed a bit. Complete rebuild from HPE is about $500 for stainless pistons and orings for both calipers. SOLD
6 used 72 vane, 355mm rotors with mounting hats and all hardware- #09930611, 09930621 All 6 have had some hard track time and were being kept as spares. They are all showing heat cracking, but none migrated to edge yet or longer than 1", so it would be at buyers discretion to use them or not. You can see the condition in the pictures. SOLD
2 sets of mounting brackets-#802200, 20.B771.02
Not sure on the different part numbers, but they both locate the caliper correctly over the 355mm rotor. SOLD
1 set of mildly used PFC pads
17mm remaining on pads. #7700.11.25.34 SOLD
Prefer to sell this all as one, but may be willing to split into 2 kits as there are 4 calipers and 4 brackets. Once kit would have 2 rotors/hats and one would sell with 4 rotors/hats. Calipers new msrp for $3700/pr, hats $700/pr, brackets $320/pr-over $12k in brake parts, not including rotors.
GT500 rear brakes with Pagid pads and Blow Fish brackets
Rear GT500 calipers with 60% used brake pads.
Factory GT500 brackets, as well as brand new Blow Fish Racing aluminum brackets ($189)
Brand new in box Pagid RS29 brake pads #E8113 R29 01 ($199)
6 Rotors all used, see pictures for condition
$425/obo
Corsa Axle back exhaust
https://www.americanmuscle.com/corsa-xtreme-axleback-1114gt.html?utm_content=Exhaust - Axleback|Corsa&utm_campaign=AMM 2005-2014 No Years&utm_source=google-pla&utm_medium=shopping&T5_Var3=blue&T5_Var4=100512
$325/obo
PNR welding supercharger/coolant reservoir (drops in spare tire well)
http://pnrwelding.net/s197-mustang-trunk-tank-with-or-without-pump-and-options_40235
$75 tank only
Everything is pictured at the following link
https://www.dropbox.com/sh/zen8djft8esg4a3/AACV6eh8wCNBRiuf0vCfF-zQa?dl=0
Feel free to email me directly at [email protected] or call/text 612-220-5929
Last edited: