The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Carbotech Pads

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

1,281
3
Tulsa, OK
I ordered set of Carbotech pads a few days ago and wanted to see if any of y'all were running the same setup or if you had any thoughts. The rep I talked to suggested xp20 for the front and xp10 for the rear, due to the fact that I will be running R6s and primarily tracking at Hallett which is very hard on brakes. I will be on stock rotors, motul rbf 600 fluid, and SS lines.
 
1,281
3
Tulsa, OK
Oops, didn't see that this had already been addressed. Thanks for pointing me in the right direction. It appears at least one person is using the xp 20 fronts.
 
I just got my new pads today. I asked the dealer to just have Carbotech send whatever they recommend for the car on street rubber and was sent 12/8. I will report my experience on this combo when I return from VIR next week if interested.
 
1,281
3
Tulsa, OK
LostPony said:
I just got my new pads today. I asked the dealer to just have Carbotech send whatever they recommend for the car on street rubber and was sent 12/8. I will report my experience on this combo when I return from VIR next week if interested.

Definitely! Let us know how they work out for you. And good luck at VIR
 

TMO Supporting Vendors

Latest posts

Buy TMO Apparel

Buy TMO Apparel
Top