The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Centerforce DYAD update

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Justin

Save the dawn for your dishes!!!
Figured I would come back to give you guys an update on the clutch. It has yet to stick to the floor or do any other of the odd things that was happening with the stock clutch. The only complaint I have is the noise it makes when you push in the clutch. other than that I love it. lighter pedal than stock. super smooth shifts.
 
Thanks for the update and welcome back.
 

ace72ace

Zaino, I put that $hit on everything
1,242
71
Found him on a milk carton last week, dragged him back to BMO... :D
 

Sesshomurai

Justin said:
Figured I would come back to give you guys an update on the clutch. It has yet to stick to the floor or do any other of the odd things that was happening with the stock clutch. The only complaint I have is the noise it makes when you push in the clutch. other than that I love it. lighter pedal than stock. super smooth shifts.

Can you give some more detail on this "noise". It's when you push the clutch pedal in? Is it a clunk, clank, swish, creak, clack?

And secondly, is this a known side effect or is there a remedy for it?
 
Justin said:
Figured I would come back to give you guys an update on the clutch. It has yet to stick to the floor or do any other of the odd things that was happening with the stock clutch. The only complaint I have is the noise it makes when you push in the clutch. other than that I love it. lighter pedal than stock. super smooth shifts.
When I installed an Exedy clutch, I had to put in a completely different T.O. If I used the original T.O. I was told both noises and possibly liquid (brake fluid) failure could occur!
 

Justin

Save the dawn for your dishes!!!
darreng505 said:
Can you give some more detail on this "noise". It's when you push the clutch pedal in? Is it a clunk, clank, swish, creak, clack?

And secondly, is this a known side effect or is there a remedy for it?
its a rattle I was told by centerforce its the couter weights on the pressure plate and is nothing to worry about and if I wanted I could remove the weights but it would bring its holding power down. when I get back in port in a few weeks I will take a video of the noise. its kinda loud with the windows down.
 

TMO Supporting Vendors

Latest posts

Buy TMO Apparel

Buy TMO Apparel
Top