A pair of 1k resistors would give a 2.5 volt signal with the 5 volt reference. That said, my read of the service manual is that if the signal from the height sensors doesn't change when the vehicle is moving, the VDM will detect that as an error and throw codes, etc. So, a simple voltage divider may not work as intended. I don't know for sure, so it might be worth a try, but don't be surprised if the VDM disapproves and locks out driving mode changes.Bringing this back up. Super helpful, thank you.
Do you know what the appropriate resistor would be for the ride height sensors?
Edit: Looks like the ride height sensors are fed a 5v ref signal. I'm gonna guess static ride height is around 2.5v (found this on a Camaro forum) so a voltage divider circuit would get me to 2.5v. If you've got any idea if I'm on the right track it would be much appreciated.