The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

CorteX Racing: Quick Change Sway Bars In Stock

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cortexracing

Supporting Vendor
42
134
Hey All! It's been a while since we have been updating product details and stock counts on the forum but we are going to make a more diligent effort of keeping everyone up to date on the latest happenings over at CorteX.

We wanted to take a second to talk about our S197 Quick Change Road Race Rear Anti-Roll Bar setup. We've offered this product in the past only to a select few customers running dedicated race setups but decided to start offering the unit as a retail item on our website. This specific bar is directed for the road race and autocross crowd. As some know, the S197 handles at its best with a very small rear bar, while some actually prefer to run no rear bar at all. Obvious challenge here is that the majority of adjustable aftermarket bars are notably thicker than the OE 18mm rear bar. It's with this in mind that we created what you see here, a 90-110lb rate fabricated rear bar with adjustable end links and, the secret sauce, a quick pin adjuster.

CorteX S197 Rear Sway Bar & Control Arm Kit.jpg[RSS-40-1000] CorteX 2005-2014 Mustang Rear Sway Bar & Control Arm Kit.jpgAnti Roll Bar System, Rear, CorteX, 3-position adjustable, fabricated, road race, 0.75 OD x 0.jpg

There's not much that is less enjoyable than getting out of a hot car and having to crawl under or jack up your vehicle and start wrenching on parts to make adjustments. Our bar is industry unique given that it uses a simple push pin adjuster setup which takes about 15 seconds per side to make a bar rate change. This can be done quickly in the pits during a session so you can fine tune your rear roll characteristics or post session. While you do still need to reach under the car, there is no need for tools.

This bar integrates specifically with our rear lower control arm brackets. If you happen to already have our lower control arms, we provide freshly powder coated updated LCA brackets which include the built in mount. If you aren't using our brackets or are still on the stock arms, we sell a bundle kit ( here ) which includes both our control arm and LCA bracket setup and the adjustable sway bar. Our bracket mounts can be used with many other aftermarket LCA's with some modification in the form of spacers and shims. However, it's our suggestion that you run our arm and sway bar combo together as they were specifically designed in conjunction with one another.

We have a handful of these bars in stock and ready to ship right now. They can be purchased with just the bar and mounts via this link: bar and mounts or as the above mentioned package at this link. Enjoy some eye candy of the setup above/ below. As many of you know, almost every piece on the majority of our products are made in the USA.

To see the quick change in action, head over to this post on our social media: here

CorteX 2005-2014 Mustang Rear Sway Bar & Control Arm Kit (2).jpg

CorteX 2005-2014 Mustang Rear Sway Bar & Control Arm Kit (1).jpg

CorteX 2005-2014 Mustang Rear Sway Bar & Control Arm Kit.jpg

CorteX S197 Rear Sway Bar & Control Arm Kit (1).jpg

[RSS-40-1000] CorteX 2005-2014 Mustang Rear Sway Bar & Control Arm Kit.jpg

[RSS-40-1000] CorteX 2005-2014 Mustang Rear Sway Bar & Control Arm Kit.jpg
 
1,156
2,111
Exp. Type
Time Attack
Exp. Level
5-10 Years
SoCal
Hey All! It's been a while since we have been updating product details and stock counts on the forum but we are going to make a more diligent effort of keeping everyone up to date on the latest happenings over at CorteX.

We wanted to take a second to talk about our S197 Quick Change Road Race Rear Anti-Roll Bar setup. We've offered this product in the past only to a select few customers running dedicated race setups but decided to start offering the unit as a retail item on our website. This specific bar is directed for the road race and autocross crowd. As some know, the S197 handles at its best with a very small rear bar, while some actually prefer to run no rear bar at all. Obvious challenge here is that the majority of adjustable aftermarket bars are notably thicker than the OE 18mm rear bar. It's with this in mind that we created what you see here, a 90-110lb rate fabricated rear bar with adjustable end links and, the secret sauce, a quick pin adjuster.

View attachment 85751View attachment 85753View attachment 85754

There's not much that is less enjoyable than getting out of a hot car and having to crawl under or jack up your vehicle and start wrenching on parts to make adjustments. Our bar is industry unique given that it uses a simple push pin adjuster setup which takes about 15 seconds per side to make a bar rate change. This can be done quickly in the pits during a session so you can fine tune your rear roll characteristics or post session. While you do still need to reach under the car, there is no need for tools.

This bar integrates specifically with our rear lower control arm brackets. If you happen to already have our lower control arms, we provide freshly powder coated updated LCA brackets which include the built in mount. If you aren't using our brackets or are still on the stock arms, we sell a bundle kit ( here ) which includes both our control arm and LCA bracket setup and the adjustable sway bar. Our bracket mounts can be used with many other aftermarket LCA's with some modification in the form of spacers and shims. However, it's our suggestion that you run our arm and sway bar combo together as they were specifically designed in conjunction with one another.

We have a handful of these bars in stock and ready to ship right now. They can be purchased with just the bar and mounts via this link: bar and mounts or as the above mentioned package at this link. Enjoy some eye candy of the setup above/ below. As many of you know, almost every piece on the majority of our products are made in the USA.

To see the quick change in action, head over to this post on our social media: here

View attachment 85742

View attachment 85743

View attachment 85744

View attachment 85745

View attachment 85747

View attachment 85752
Highly recommended!! This bar combined with the Cortex/Penske coilover setup have drastically transformed the handling of my car. As they say in racing, results speak louder than words: Six NASA TT3 races into the season - P1 in five of six!!
 

ArizonaBOSS

Because racecar.
Moderator
8,730
2,734
Arizona, USA
I have been running this on my car for some time now, it's a great piece and extremely easy to adjust.

1681926899371.png
 

cortexracing

Supporting Vendor
42
134
Appreciate the replies and kind words gents! @67GTA those are fantastic results! Send me a PM and some pictures if you would like, would love to highlight your car and achievements in a post on our social!

Also, we recently updated websites and lost all of our old product reviews. If you guys find yourselves bored one night, please consider dropping a review on our products that you own :)
 
223
420
Exp. Type
Time Attack
Exp. Level
3-5 Years
Southern California
Highly recommended!! This bar combined with the Cortex/Penske coilover setup have drastically transformed the handling of my car. As they say in racing, results speak louder than words: Six NASA TT3 races into the season - P1 in five of six!!
I don't even have a car right now but I can vouch for this. I can run faster when I'm within 100 feet of this guy. It's pure black magic.
 
Last edited:

TMO Supporting Vendors

Top