The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Drain plug thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

57
22
Exp. Type
HPDE
Exp. Level
3-5 Years
Virginia
@TMSBOSS
Drain and fill plugs on the 3160 GT350. ORB AN8? Attempting to find Banjo fitting that will work having difficult time running through amazon, jegs and earls.

20220514_183957.jpg

20220519_113719.jpg
 
Last edited:
@TMSBOSS
Drain and fill plugs on the 3160 GT350. ORB AN8? Attempting to find Banjo fitting that will work having difficult time running through amazon, jegs and earls.

View attachment 76019
If this is the fitting in question, it is definitely NPT based on how much thread is hanging out and all that pipe tape.. lol
Size is hard to say but probably 3/8 or 1/2
 
57
22
Exp. Type
HPDE
Exp. Level
3-5 Years
Virginia
I've run through SOOO many fittings. Couldn't find any banjo fitting that would fit. I didn't have much luck finding any short shaft 1/2NPT. I believe I got it to a good point to finish the setup.

20220523_194149.jpg
 

TMO Supporting Vendors

Top