Flyboygsxr
ADAM
So I installed my DSS driveshaft and Steeda adjustable UCA mount and adjustable 3rd link this last weekend. The third link is a spherical bearing set up and so are my LCA's from Steeda. I did them all at the same time and needless to say there is a lot of noise now coming from the rear end...no noise from suspension movement because I made sure to grease everything but you can hear what I am assuming is the noise of the driveshaft or the gears in the rear diff. When I initially did the install the noise wasn't very bad but after I got under the car and readjusted the UCA to set the pinion angle I got a lot more noise coming from the rear end. With the pinion angle set incorrectly it was quiet and now that it is at -1 it's loud and sounds like the gear noise I hear from a race car. There are no vibrations but if anyone has any ideas or thinks I did something wrong because of all the increased noise please chime in. Thanks in advance