- Thread starter
- #21
four-walling
Kerry, San Diego
Today I ordered the HRE P45S wheels with a brushed silver finished clearcoat. Going with the Laguna Seca factory setup of 9" and 10" wide wheels on the factory 19" diameter. I wanted a "minimalist" style wheel for the car. They will be ready in 4-6 weeks.
The info regarding lowering the car was very helpful. Since the car is not tracked and the height just needs to be dropped a little bit, I will order just springs and an adjustable panhard bar.
I measured the car last night and see the factory setup has the left wheel about 3/16" further out then the right wheel at standard, OEM height. I assume this can be corrected with the adjustable panhard bar.
...have not seen any Mustangs mounted with this wheel, yet...
The info regarding lowering the car was very helpful. Since the car is not tracked and the height just needs to be dropped a little bit, I will order just springs and an adjustable panhard bar.
I measured the car last night and see the factory setup has the left wheel about 3/16" further out then the right wheel at standard, OEM height. I assume this can be corrected with the adjustable panhard bar.
...have not seen any Mustangs mounted with this wheel, yet...