The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Ford Racing High RPM Competition Pulse Ring

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I know this is the supposed culprit that kept Ford from revving the boss mototrs up to 7800 like they wanted to and this wasn't found out till it was too late.

What I'm looking for in this thread is difficulty of install. Special tools reuired/knowledge required etc.

I'm not a fan of just moving the rev limitier up to 8000 knowing what I know about the entire boss build.

You're expertise is appreciated!

http://www.americanmuscle.com/frpp-ignition-pulse-ring-1113gt.html?source=igodigital
 

ArizonaBOSS

Because racecar.
Moderator
8,730
2,734
Arizona, USA
Should be a no-brainer install, only problem is you have to take the trans/clutch/flywheel out/off to get at it. So you might want to make it worth your while and install it along with an aftermarket clutch/flywheel.
 

TMO Supporting Vendors

Top