The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Front sway bar install help, please

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Do I have to remove the bottom chassis brace to get the stock bar out and the new bar in? The alternative appears to be to wiggle them out and in through a wheel well. Is removing that brace as easy as it looks?
 

Senderofan

Having more fun than should be allowed..in my Boss
Here are the direction I received with my sway bars: http://www.hotchkis.net/_uploaded_files/22102.pdf

The big difference for the Boss is you have to remove the plastic aero bits from under that area. And if my memory serves me right...you do have to remove that brace....and it wasn't that difficult. That was also missing from the instructions from Hotchkis.

Good Luck,

Wayne
 
Yah, its missing from the Youtube tutorial that goes with the Strano bars, too. Must be a 11+ thing. It looks simple enough, but I didnt want to undo one of the bolts only to find it was holding something in the engine bay (like the rad).
 

TMO Supporting Vendors

Top