The Mustang Forum for Track Enthusiasts

Track Mustangs Online was built specifically for those who track their Mustangs!

S197 FS: 18x11 Forgestar CF5 wheels, GLoc R8 rear pads, FRPP hubs, wedge engineering driver seat bracket + sliders

PLexo50

TMO Advanced
Feel free to PM me for any additional questions and/or to shoot me an offer. Prices are all negotiable and located in Pittsburgh, PA.

-Wedge Engineering driver seat bracket + double sliders for S197. Used for about two years, currently bolted to a Sparco Evo 2 seat. I'm assuming could be used for a wide variety of other seats. I don't have a picture of it(at the moment) but it's black and it's a functioning seat bracket.
$100obo

-Forgestar CF5 18x11 +52, TPMS sensors installed, some chipping around the edges of the lug openings, used 305 NT01s installed but appear aged out(2014)
I'll try to get better pictures of these once I make some dadgum space in the garage.
$1000 obo
fLXxdWXyR5C__UAYp6mabg.jpeg





-GLoc R8 rear brake pads(stock S197 rear)(These have one track day(3 sessions) and about 150 street miles. These performed very well and will also make your Mustang sound like a school bus.). $make an offer

ntLZ2Y_yQSqUISu_qFkUKg.jpeg


vEAZmwZrSNKLwh2du3yM6g.jpeg




-Ford racing front hubs with ARP extended studs. Will include new Motorcraft fasteners and Motorcraft dust covers [installed same time as the brakes-one track day(3 sessions) and about 150 street miles]
$210obo
VCfHIJWdRSCPsqhCotpPIQ.jpeg











-Blowfish racing bracket and Barton version 2 short shifter (MT82) [Purchased used but never installed]
- Opmustang 1/2"-20 High Strength Racing Lug Nuts in Satin Black w/ low friction coating Quantity 20 [installed same time as the hubs-one track day(3 sessions) and about 150 street miles]
- ARP extended rear studs (100-7723) Quantity 10 [installed same time as the hubs-one track day(3 sessions) and about 150 street miles]
-OPMustang 25mm front hubcentric spacers(later versions) [only used to test fit the Forgestars]
-Cortex Xtreme grip offset street coilovers, installed for about two years, three track days, and about 1,500 street miles.
[has some dings on one of the front coilovers near the sway-bar end link mount due to a rushed removal]
 
Last edited:

07gt500

TMO Beginner
6
3
PA
5-10 Years
How much do you want for the Cortex torque arm and Cortex watts link(street) with diff vent/catch can? My parents live in Johnstown, so I would prefer to pick them up. Thank you
Randy
 

07gt500

TMO Beginner
6
3
PA
5-10 Years
I am interested in the watts and torque arm and Cortex rear lower control arms with Shelby LCA relocation brackets if you want to split them.
 

zajac

TMO Intermediate
73
41
Utah
You have not stated the front rear spring rates. They appear to be fairly light duty, street type, rate springs rather than heavy track duty springs. So a new set of front and rear Eibach 2.5" prings will be about $300I would add to your price of the springs. send me a PM for what you need for this Corten SA shock setup. Normally TMO requires a price for any For Sale listing....?
 

Fabman

Epic Contributor
2,977
1,958
Pleasanton: 1/2 way between Sonoma and Laguna Seca
W2W Racing
20+ Years
You have not stated the front rear spring rates. They appear to be fairly light duty, street type, rate springs rather than heavy track duty springs. So a new set of front and rear Eibach 2.5" prings will be about $300I would add to your price of the springs. send me a PM for what you need for this Corten SA shock setup. Normally TMO requires a price for any For Sale listing....?
I have a pile of Coil over Springs. Some still new in boxes.
 

TMO Supporting Vendors

Top