This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Just now getting back to this. Plus, it's been too hot in Texas for this stuff... I've been waiting for my dealer to get the kit to repair the rear bumper cover gap. They did that work this week.bpracer - did you get this done? any pics? what were your results?
Thanks
Jack
please add a picture of this installed.Picture of the modified grill.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Not with hood pins...I believe that opening into the CAI is going to cause you even more hood lift.
Sent from my iPhone using Tapatalk
Not with hood pins...
I also have another air filter assembly that I may modify the top to put on a separate lexan lid. I need to ask Treynor for a picture of his GT4 to see how Multimatic did his one off setup. I would only require that if I added the two side GT4 hood vents, as they uncover the air cleaner. But since I haven't won the lottery, there will probably not be any more GT4 parts in my future.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Sorry. I wasn’t aware you had pins. I need to pay attention better lol. Sorry.
Sent from my iPhone using Tapatalk
Not with hood pins...
I also have another air filter assembly that I may modify the top to put on a separate lexan lid. I need to ask Treynor for a picture of his GT4 to see how Multimatic did his one off setup. I would only require that if I added the two side GT4 hood vents, as they uncover the air cleaner. But since I haven't won the lottery, there will probably not be any more GT4 parts in my future.
Sent from my SAMSUNG-SM-G900A using Tapatalk
What hood is that? can you add more pictures please?
Thanks
Jack
This is how I did my GT350 CAI with lexan.Not with hood pins...
I also have another air filter assembly that I may modify the top to put on a separate lexan lid. I need to ask Treynor for a picture of his GT4 to see how Multimatic did his one off setup. I would only require that if I added the two side GT4 hood vents, as they uncover the air cleaner. But since I haven't won the lottery, there will probably not be any more GT4 parts in my future.
Sent from my SAMSUNG-SM-G900A using Tapatalk
By plate, if you mean the air filter cover then that is jeffv8's mod.bpracer,what did you use to cut the plate? do you have any measurements of the size and location?
Were did you get the GT4 vent?
Thanks
Jack
By plate, if you mean the air filter cover then that is jeffv8's mod.
If you mean the hole for the vent, I just had to sneak up on it. The vent only fits in one spot as it follows the lip of the center ridges of the hood. I used an over sized Dremel tool with about a 2" cut off wheel.
The GT4 vent came via Kohr Motorsports from Multimatic. It's not something they have in stock typically. The FP350S vent will probably be more cost effective whenever it becomes available, but the GT4 vents looks better in my biased opinion. However, the GT4 piece is expensive. A new GT500 hood might also be a better way to go, but who knows when that thing will appear.
Sent from my SAMSUNG-SM-G900A using Tapatalk