GT350 radiator protector?

[YellowJacketBoss302]

After just few track days my radiator is getting rather dinged up. That honeycomb nomex worked real well to protect the BOSS radiator. Anyone found a good radiator protector for the GT350s?

 

[VoodooBoss]

The Nomex should work on your 350.

 

[LERCH]

That's what I plan on getting for my gt as well.

Sent from my SM-G950U using Tapatalk

 

[YellowJacketBoss302]

It was very simple to install on the BOSS. It just slid right down in some slots in front of the radiator. I don't see a simple method on the GT350. Any ideas?

 

[JDee]

Old thread revival. Just got one of these nomex honeycomb thingies for rad protection since the A/C delete leaves the rad very bare and exposed. Not much that I can see on the S550 to use. Thinking I will use small black wire ties through the honeycomb/radiator and wrap them around the sides of the rad?
Has anyone installed one on an S550/GT350? If so how'd you do it?

 

[boardkat]

i cut this to fit my heat exchanger:

Nomex Honeycomb Radiator Guard Protector Screen Mesh, 22 x 31

Place directly in front of radiator and let it take the beating instead of your expensive aluminum radiator. Made of rigid Nomex material, which is lightweight but very strong. This is the same stuff the Outlaws use! Some guys have raced a whole season with one honey comb protector. Usage will...

www.speedwaymotors.com

and attached it by pushing these through:

Honeycomb Mounting Kit for Transmission Coolers/Fans/Shrouds

Simple, yet effective nylon mounting kit for mounting transmission coolers, fans, and fan shrouds. Simple installation, that can be done in minutes. Sold as a kit.

www.speedwaymotors.com

works great, and hasn't impacted air/fluid temps by any measurable amount (oil/tranny coolers and rad located after the nomex/heat exchanger).