The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

GT350R - Aftermarket Wheel Lug Nut Solution

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

This product is extremely well executed. IMO it's a must have product for any S550 Mustang owner using either R or longer ARP wheel studs.
 

TMSBOSS

Spending my pension on car parts and track fees.
7,530
5,247
Exp. Type
HPDE
Exp. Level
10-20 Years
Illinois
The R has a longer stud to accommodate the thicker "Center Section" of the carbon fiber wheel. When you remove the stock wheels and install after market wheels, this center section is thinner. The studs then protrude farther from the surface and bottom out in the closed stock lug nuts.

FWIW I've seen these lug nuts on Terrance's car and they look good.
 
Last edited by a moderator:
Basically the GT350R CF wheels have a built in 1" spacer.

@rick shea define "fit"? They will fit on any S550 regardless if you have longer wheel studs or stock. They are designed to cover the longer R wheel studs with aftermarket wheels like @TMSBOSS stated. They also work well if you're running longer ARP wheels studs for track use and don't want the threads on your ARP studs showing. They will work but will stick out further than stock lug nuts on non R cars with stock wheel studs. Regardless they stick out the same length on all wheels.
 

50Deep

Jockin' GT350's
837
835
Sacramento
I am interested in a set of lugs for my 350R, These look perfect...any available?
Ken, I sent you an invoice. Let me know if you didn't get it.
Are these lug nuts available for the standard GT 350 (2019) wheels? If so what are the demensions, cost, availability, finish, lug nut socket size?
Still have a few sets available for purchase. The initial batch of 30 will be done May 24, 2019, and are all sold out. I added on an additional 10 sets and those are starting to get claimed also. Send me an email if you want to get a deposit in on a set. [email protected]
They will fit any S550 Mustang. The R has longer wheel studs stock but many install longer wheel studs on Mustangs for track use and these are a great way to cover the longer studs.
Thanks for clarifying Rick...
Are they too long for standard GT 350 wheel studs?
These will work with the OEM GT350 studs just fine.
The R has a longer stud to accommodate the thicker "Center Section" of the carbon fiber wheel. When you remove the stock wheels and install after market wheels, this center section is thinner. The studs then protrude farther from the surface and bottom out in the closed stock lug nuts.

FWIW I've seen these lug nuts on Terrance's car and they look good.
Appreciate the kind words brother.
 

50Deep

Jockin' GT350's
837
835
Sacramento
Great news everyone. The latest batch of titanium lug nuts are rolling in. 6 sets have already shipped, with the rest scheduled to be shipped to enthusiasts by the end of the month. Due to increased demand this batch was increased to 40 sets. All have pre-sold with the exception of 7 available sets. If you are interested in grabbing a set before they are gone please send me an email. The next batch will not be ordered until December of this year.

Exhibitions of Speed Titanium Lug Nuts 2019 Batch (1).jpegExhibitions of Speed Titanium Lug Nuts 2019 Batch (2).jpegExhibitions of Speed Titanium Lug Nuts 2019 Batch (3).jpeg
 

50Deep

Jockin' GT350's
837
835
Sacramento
We are officially sold out!

Ended up ordering 40 sets total to handle the extra demand and they are all snapped up. Payment pending on a couple sets. Holding onto 1-2 sets personally.

The last batches are being shipped to me this week. Planning to have all orders shipped out this Saturday.
 

50Deep

Jockin' GT350's
837
835
Sacramento
I have a G2019 GT350R and would like to use these with my carbon fiber wheels. Are they too long for that use?
Rick, the extended front lug nuts would be too long, but the shorter rear ones would work. On the next batch I can order you a set of short ones only if you plan to stay with the OEM carbon wheel
 

50Deep

Jockin' GT350's
837
835
Sacramento
The weights are in. Enthusiast Matt Solnik got us some weights with the Exhibitions of Speed Titanium Lug Nuts compared to his OEM pieces on the GT350R. This setup is paired with our Signature Wheel SV902 and showcases exactly how the two were engineered to work together flawlessly. The lug nuts are wet with anti-seize for the most real world weights.


The titanium pieces boast a 50% reduction in mass, increased strength, resistance to swelling/heat expansion, a higher engagement point to protect the wheel, corrosion resistance, and flush fitment with the GT350R extended studs. Killer looks to boot so what more could you ask for?


Thanks everyone that got a set and let me know if you want in on the next batch. I am testing these for the F150 Raptor as well, and you can expect the next batch to be built toward the end of 2019.


**The other 4 titanium lug nuts are hidden in the back of the scale for those with a keen eye**

089A0C6D-89EA-4755-BA5F-430332CF7F49.jpeg3E907E86-1D20-4D96-BB7F-74DC0A44F0D7.jpegFFDFEDA8-33AF-4217-A25F-CCFE5D33DB6E.jpegF18EC6E9-A5DB-46F8-BE5E-4DB9711F783E.jpeg20DF69B1-912B-46C1-9F5B-1BE0445C937C.jpegDCA9B2C8-908B-440C-A00B-1D33325E3A86.jpegFEB8228D-8573-4919-857D-69FB8DC9C00C.jpeg9927EF04-D165-416F-9079-859B1DE95CFA.jpegC1569820-B99B-464D-96DD-654533DC3D4D.jpeg8D551797-AB85-4205-8A4D-41560EA45290.jpegC792B7F9-7BFC-4FD2-859D-16D35EECDBEB.jpegFA80F52C-7043-4BA1-B6F5-E64FE52BC93F.jpeg8291CAC8-AD23-482E-85F4-F9A4D68D2F36.jpegABB02A16-016B-47D8-B96C-7AC30A311C04.jpeg620E97A8-FB76-44FD-BBCA-EC2291A795C4.jpegA03AFA8B-B522-4FBB-9A7E-2A649BBB22A1.jpegDF60F2ED-784C-44FD-A436-242AFEAB9CA5.jpeg72AFF28D-1EA2-4258-AE02-896041B81DFE.jpeg
 
Rick, the extended front lug nuts would be too long, but the shorter rear ones would work. On the next batch I can order you a set of short ones only if you plan to stay with the OEM carbon wheel


When do you expect the next batch and how much would the set be with the shorter lug nuts that work with my carbon fiber wheels.
 

TMO Supporting Vendors

Top