1 old racer
Too blessed to be stressed and old track whore,
My S550 has a complete set of Ford track springs, struts and shocks, ( as well as a few more goodies), so it is lowered about 1" in the front and with 3/8' steeda spacers agout 5/8" in the rear. I just installed a Steeda front sub frame k-brace which caused the ground clearance to drop about 3/8 of a inch. This proved to be too low for my quick jacks to be stored under the car. So I built a set of full length ramps. I should note that this is my 2nd set. I had to built a set for my Honda S2000 track car years ago just to get a floor jack under the jacking points. Anyway the ramps are modular so I can rempve the center section to position the quick jack, and once jacked up i can remove the sections under thee wheels easily if needed. I used 2x4's and 23/32 ply wood for this ramp. for my honda I used 2x6's and 23/32 ply wood. I really like it as I did the one I built for my honda. Anyway thought I would share.