The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Is there an inside and outside piston on the 4 piston Brembos or are the piston lengths the same?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

66
49
Exp. Type
HPDE
Exp. Level
Under 3 Years
Pittsburgh PA
I just rebuilt my Brembos and it hit me that I didn’t keep the inside and outside pistons separate. I got everything together and they seem to have fully retracted but I wanted to double check lol.

I can easily get my street pads in but the track pads are tight. Also got a new rotor and I’m thinking that once I compress the pistons and retract them again things should go smoothly but wanted to ask the question.

Thanks!
 

PaddyPrix

If breakin' parts is cool, consider me Miles Davis
725
1,081
Exp. Type
Time Attack
Exp. Level
Under 3 Years
San Diego
Piston lengths are the same.

44/40 x30 if you have the same 4 piston as the GT500.
1652829964487.png

(great reference here for Brembo rebuild parts -- https://racingbrake.com/ford-10/)
 

TMO Supporting Vendors

Top