The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

M-5649-R1 Control Arms and M-5650-A Relocation Brackets

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I just received the M-5649-R1 Rear Lower Control Arms and M-5650-A Lower Control Arm Relocation Brackets.

Is this much of a gap (about 1/8 of an inch) normal?

ReloBracket_zpsba2394b0.jpg
 

TMSBOSS

Spending my pension on car parts and track fees.
7,551
5,283
Exp. Type
HPDE
Exp. Level
10-20 Years
Illinois
NO!!!

Ford had a problem with their supplier. The front and rear of the LCA SHOULS be different. The rear is wider. Unfortunately, some were produced incorrectly/ Both front and rear are the same. I had th same and installed along with a few others on this site.

Gary assisted with contacting Ford and securing replacements.

Since your arms have not been installed, contact your supplier and exchange.

Search for LCA threads on this site for more details if needed.

Tracy
 

TMO Supporting Vendors

Latest posts

Buy TMO Apparel

Buy TMO Apparel
Top