The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Master cylinder Brake line fitting size ?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

598
536
2011 Mustang, I'm thinking about running no abs since I remove all the wiring looms. Was going to add a rear brake proportion valve. Need the Fitting and line size for make new lines, Any one know what they are ?
 
Last edited:
The GT 2008 has M12-1.0 not sure if 2011 is the same. There is a valve with M10 threads instead of the 1/8 what I got what made it more difficult to adapter it, but NAPA has them if you already got a 1/8 valve
 

TMO Supporting Vendors

Top