Mickey Thompsons 3727R as rear tires in a Boss 302

[Abul]

Hey Guys,

I just imported a 2013 Boss 302 into Pakistan, which is supercharged by Hennessey with 700Hp. It presently has 285/35/20 tires on it, but i cant get the power to the ground. I am planning to get MT 305/35/20 for the rear, but need to know if the tires will fit in the rear without any negative effects. I will appreciate any input as the MT guys refuse to comment on it due to liability issues.

Best Regards,

Abul

 

[VoodooBoss]

Welcome to BMO. I can't imagine there are many Boss 302's in Pakistan. I don't use those tires but many of us use 305 tires in the rear with no rubbing. The key will be how tall are they. If they are a lot taller than 27" you might get a bit of rubbing. There's a lot of room back there though. Good luck.

 

[Flyboygsxr]

As long as you have the correct offset/backspacing on the wheels you will be fine. May I ask what wheels you are thinking of putting the 305's on?

 

[Abul]

Hey Guys,

Thanks for the feedback. Yes its the only Boss 302 in Pakistan, so far. It has 20" wheels, not sure about the exact width.

 

[Abul]

I would like to share a pic, but I don't think I have that privilege.

 

[302BOB]

That privilege is God given with Rick's permission..

 

[VoodooBoss]

To post photos please read post #3 below. You'll need an external photo hosting site.

https://trackmustangsonline.com/index.php?topic=212.0