The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Mid-Pipe

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

We have seen as little as 6 rwhp and as mush as 21 rwhp. Seems to be depending from car to car. Also will depend on which CAI and tune you are running on the gain. I will see if I can find a before and after dyno graph showing the gains.
 
56
0
I have a steeda cold air kit and 93 octane tune, my numbers stock were 384 rwhp and 314 torque after the kit and tune my numbers were 410 rwhp and 340 torque.
 
Justin said:
xstang said:
Justin said:
xstang said:
Justin said:
I really wish more than just MRT made a mid pipe with side exits that work with the factory headers.

They are making me one... ;D $599
who is they?

MRT
yeah I know they make one already. I wish more than just MRT did.
http://www.mrt-direct.com/93o900.html

Mrt didn't make an offroad version.. Had to special order mine.
 

Justin

Save the dawn for your dishes!!!
xstang said:
Justin said:
xstang said:
Justin said:
xstang said:
Justin said:
I really wish more than just MRT made a mid pipe with side exits that work with the factory headers.

They are making me one... ;D $599
who is they?

MRT
yeah I know they make one already. I wish more than just MRT did.
http://www.mrt-direct.com/93o900.html

Mrt didn't make an offroad version.. Had to special order mine.
oh ok that's far to much money for an off road pipe
 
Justin said:
xstang said:
Justin said:
xstang said:
Justin said:
xstang said:
Justin said:
I really wish more than just MRT made a mid pipe with side exits that work with the factory headers.

They are making me one... ;D $599
who is they?

MRT
yeah I know they make one already. I wish more than just MRT did.
http://www.mrt-direct.com/93o900.html

Mrt didn't make an offroad version.. Had to special order mine.
oh ok that's far to much money for an off road pipe

Yep, but it's supply and demand I guess.. Nobody else offers it (except the full kooks system). I want an offroad pipe and to keep the side exhaust so I didn't have any other options really. I din't want to "just replace the cats" because of the diameter.
 
130
0
I don't think there's much gain to be had in the midpipe itself. It's the fact that the new midpipe comes with high flow cats or no cats. The high flow cats are worth about 5-9 hp and no cats are worth 15-20 hp, more if other mods are present.
 
If I'm not mistaken you can get just the kooks mid pipe that keeps the side exhaust. It's a nice piece. With or without cats!

http://www.cooltechllc.com/Boss/Boss_KO_HPipeBossNoCat.shtml
 
Tflong24 said:
If I'm not mistaken you can get just the kooks mid pipe that keeps the side exhaust. It's a nice piece. With or without cats!

http://www.cooltechllc.com/Boss/Boss_KO_HPipeBossNoCat.shtml

Awesome... I just sent them an email to confirm. I'll post back with my findings once I hear.
 

TMO Supporting Vendors

Top