The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Mustang License Bracket

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Looking to buy a license bracket for my 2013 Laguna Seca. A no drill front license bracket that is affordable. I do not have the splitter on my Laguna because it will scrape on my driveway but anyway its basically a regular boss since I dont have the splitter so does anyone know anyone who makes these?
 

batman48195

I never get tired of driving it!
Here is a link to a no drill front license plate bracket using one off of a Ford pick up that you can order in the parts dept.
Brian

[youtube]http://www.youtube.com/watch?v=CHBsoF6BJAE[/youtube]
 

pufferfish

Supporting Vendor
1,094
66
Maryland
i have been working on a license plate bracket that mounts to my front tow hook kit. just pull the pin and swap the loop for the bracket, or vise versa. it will work on all my tow hook kits from 2005 up. probably won't be ready for purchase until june though. i anticipate it coming in at less than $50.

this is my prototype i have been using all winter. seems to be holding up well. i go through automatic car washes and it stays put.

20130321083954.jpg
 
batman48195 said:
Here is a link to a no drill front license plate bracket using one off of a Ford pick up that you can order in the parts dept.
Brian

[youtube]http://www.youtube.com/watch?v=CHBsoF6BJAE[/youtube]

+1! Super easy on/off & cheap!
 
batman48195 said:
Here is a link to a no drill front license plate bracket using one off of a Ford pick up that you can order in the parts dept.
Brian
The only problem is it will rub the paint. I would put a few layers of colored vinyl behind it if you go this route. I just leave it off, so far no problems. I have had a cop actually look at the front to run my plate and he had to walk around back, never said anything. But it was not a situation where I got pulled over, either. I imagine that would have gone differently.
 
four-walling said:
http://ccmustangbrackets.com/welcome-to-craigs-custom-mustang-brackets/

Just ordered mine today - thx for the link!

Just got my plates in the mail -- three rounds of DVM telling me all my ideas were taken.... smh

156062_10200846298350471_302370744_n.jpg
 

TMO Supporting Vendors

Top