The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

My best time slip

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

unrealford

Mustang owner since 84
521
0
Here's my best time slip from this summer..

Car was stock, with 15x10 drag radials, and a MGW shifter, Steeda Upper Control Arm.
Here's video
http://m.youtube.com/watch?v=dd5E2ST4lWY

th_2012-09-16_13-57-43_648.jpg
 

unrealford

Mustang owner since 84
521
0
I added the video of that run to the first post.

I'm launching without launch control, I'm launching about 3,800 to 4,200..

I installed a CAI and tune since, but when I tried to run it at track it just bogged till the point where it took almost 7 seconds to finally pick up RPMs, I was told it was because the tune didn't have Torque management wasn't disabled and when it sees high torque applied to clutch it pulls back power to prevent clutch slippage. Track Key never gave me issues.

I also ran a 11.97 @115
 
That's an impressive time. I'm glad to see our first new post in this forum!
 

unrealford

Mustang owner since 84
521
0
Im using Race Star Wheels, they clear the brakes on front and back, Im not using front yet.
2012-02-24_16-08-12_173.png
533038_3712486814936_1310858603_n.jpg
 

unrealford

Mustang owner since 84
521
0
15x10, but 15x8 would work and then you woundt need a relocation bracket for swarbar.

I had to relocate the swaybar for the 15x10s
 
unrealford said:
15x10, but 15x8 would work and then you woundt need a relocation bracket for swarbar.

I had to relocate the swaybar for the 15x10s

Thank you for your reply. I had read the same about the 15x10s on another forum and was looking for confirmation.
 

TMO Supporting Vendors

Top