Just thought I'd blog alittle. Car is a 14 GT/TP. I'm an experienced driver.
Mods:
Brake ducts
DTC 60s
Typ200
SVE Drifts
Hoosier R6 scrubs (6 cycles) 285/30-18 (they were cheap!)
Prep:
See my other posts re: duct install. Pads ended up easy cause the car only has 1500 miles, so the rear pistons did not have to be retracted (fronts either). Fluid change with Motive bleeder (oddly, I didn't have an 11mm wrench so I didn't get the inboard driver's side front bled cause I didn't want to chew up the screw). Test drive was good. Loaded wheels (1 trunk, 2 back seat, 1 front seat). Helmet, head sock, gloves, shoes--check.
Time to kick the tires and light the fire!
Note to self (needs):
Tire totes
11mm wrench
13/64 deep impact
Remove rear plates
Mods:
Brake ducts
DTC 60s
Typ200
SVE Drifts
Hoosier R6 scrubs (6 cycles) 285/30-18 (they were cheap!)
Prep:
See my other posts re: duct install. Pads ended up easy cause the car only has 1500 miles, so the rear pistons did not have to be retracted (fronts either). Fluid change with Motive bleeder (oddly, I didn't have an 11mm wrench so I didn't get the inboard driver's side front bled cause I didn't want to chew up the screw). Test drive was good. Loaded wheels (1 trunk, 2 back seat, 1 front seat). Helmet, head sock, gloves, shoes--check.
Time to kick the tires and light the fire!
Note to self (needs):
Tire totes
11mm wrench
13/64 deep impact
Remove rear plates