- 137
- 1
I took the plates out a few nights ago and drove today. The driver side Quad exhaust is now vibrating on the frame.
Did i tighten the bolt next to the tip too much or something else? I am thinking if i back off the bolt a turn or two it may loosen it up enough. OR do I need to go back to the Hpipe and lower the connecting pipe a little?
Thanks for suggestions
Did i tighten the bolt next to the tip too much or something else? I am thinking if i back off the bolt a turn or two it may loosen it up enough. OR do I need to go back to the Hpipe and lower the connecting pipe a little?
Thanks for suggestions