The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Passenger side side pipe sags

The passenger side pipe sits much lower than the driver's side. The "elbow" is the lowest point and it's probably a good 3 inches from the bottom of the car. Is there a bracket or hanger I'm missing?
Bent pipe, damaged flex pipe, or you can loosen the flange bolts and rotate the side pipe so that the elbow moves up.

It's gotta be one of those three.

Grant 302

basic and well known psychic
cosm3os said:
That did it! Didn't think I'd get a leak free seal with the two flanges that far rotated, but it's good!

I was surprised about that too. My Boss was that way stock...and probably the main reason why I didn't have any problems when I put the pipes on my GT. Both flanges were clocked almost as far as they could go.

TMO Supporting Vendors