The Mustang Forum for Track Enthusiasts

Track Mustangs Online was built specifically for those who track their Mustangs!

Register Log in

PP2 Wheels and Tires

mustang5o

TMO Intermediate
Messages
60
Reaction score
23
My first question is, does anyone know if the old S197 Track Pack/Brembo Wheels will fit on a PP2 car? I'm considering trading in to a 2018 PP2 car and since it's winter time here I was going to see about putting a set of TP/Brembo wheel with Blizzaks on the car.

Second, is anyone out there running a true square setup on aftermarket wheels and tires? I was looking at something in a 19x10 (maybe 19x11) like the SVE S350, R350(first choice) or maybe the SP2 wheel. I'd probably be looking at RE71's or Ventus RS4. Be great if I could get to a 305/30 but may consider a 285 square setup. This would be for street and track.
 

JDee

Ancient Racer
Messages
746
Reaction score
634
Location
halfway between Mosport and Shannonville
I was running R350 wheels with 285/10" front 305/11" rear, but I recently did the work to run 305/11" square using the R350 wheel. I needed a 20mm spacer and the long ARP studs up front. Haven't run it yet but it fits with ample clearance. I have the FR3 Ford suspension and CC plates -2.5 camber.
 

mustang5o

TMO Intermediate
Messages
60
Reaction score
23
I was running R350 wheels with 285/10" front 305/11" rear, but I recently did the work to run 305/11" square using the R350 wheel. I needed a 20mm spacer and the long ARP studs up front. Haven't run it yet but it fits with ample clearance. I have the FR3 Ford suspension and CC plates -2.5 camber.
What year?

I have heard of others doing a 305 square but hadn't seen it on PP2 with aftermarket wheels. Probably need to look at more forums as I'm sure they are out there. 18's would also be nice to cut down on tire price.
 

strengthrehab

TMO Race
Messages
332
Reaction score
238
Location
Texas
My 16 PP fits 18x11/305's on all 4 corners.

Not a ppl2, but should be similar.

Sent from my SM-G960U using Tapatalk
 

JDee

Ancient Racer
Messages
746
Reaction score
634
Location
halfway between Mosport and Shannonville
What year?

I have heard of others doing a 305 square but hadn't seen it on PP2 with aftermarket wheels. Probably need to look at more forums as I'm sure they are out there. 18's would also be nice to cut down on tire price.
It's a '16, PP1, but as far as I know all the Mustang GT S550s share the same suspension in terms of geometry, clearances, hubs, etc., PP2 should be the same as well I think? It's not uncommon to find people who are serious track days types running 305 square, I don't think it's that big of a deal to do these days.
 

strengthrehab

TMO Race
Messages
332
Reaction score
238
Location
Texas
It's a '16, PP1, but as far as I know all the Mustang GT S550s share the same suspension in terms of geometry, clearances, hubs, etc., PP2 should be the same as well I think? It's not uncommon to find people who are serious track days types running 305 square, I don't think it's that big of a deal to do these days.
305 square here

Sent from my SM-G960U using Tapatalk
 

APEXRaceParts

Race Proven, Street Approved
Supporting Vendor
Messages
509
Reaction score
632
Location
Bay Area, CA
Details please. What wheels and tires, suspension, camber...
You can check out his fitment info here: https://www.apexraceparts.com/blog/kens-2016-performance-pack-gt-with-ec-7-wheels/

Our 18" wheels fit nicely over the S550 6 Piston brakes and open up many tire options. If you did go 19x11", that works great as well but I would use 305/30-19 tires opposed to the 35 series as again it has many more quality tire offerings.

Here is our 18" EC-7 over the S550 6 pots.


- Cory
 

JeffV8

TMO Addict
Messages
550
Reaction score
439
Location
Monaca Pa
My pic above is with Apex EC-7 19-11 with 305-30-19’s great wheels. If I had to do it again I would have gotten 18” just easier to get take off tires
 

Bill Pemberton

0ld Ford Automotive Racing Terror
Top Poster Of Month
Messages
4,069
Reaction score
2,589
Location
Blair, Nebraska
Jim,

Just stick with Cory, the man knows where he speaks. I had Apex rims on my GT 350 -----just drop him a note and he will get you set up and save you alot of time. You can sell the rims you have pretty darn easy ,I would bet?
 

TMO Supporting Vendors

Top