The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Pre Season Brake Pad Clearance Sale - G-LOC, Raybestos, AP Racing Fitment

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

KNS Brakes

Supporting Vendor
292
20
Cary NC
We have some brake pad inventory to move to get ready for track season and some of the pads are for Mustangs.
Compounds and fitment are shown below so if these are what you use you can save $$.

- First come first serve - - Stock on hand only
- Please check your fitment/compound.

Please email [email protected] to order.

Inventory-Sale.jpg



Clearance Pads - 02062020.jpg

NOTE: ST43R767T17 M (modified) pads are the same shape as Ferodo FRP3018 that fit the AP Racing CP9445/CP9449.
 
Last edited:
1,246
1,243
In the V6L
Pads with 1718 in the part number may well fit stock GT350 rear calipers - check with KNS on that. I've run FMSI D1718 pads on the back of my GT350 before and they fit fine.
 
2,198
1,065
Bay Area
Pads with 1718 in the part number may well fit stock GT350 rear calipers - check with KNS on that. I've run FMSI D1718 pads on the back of my GT350 before and they fit fine.

Thanks but I’m not sure about mixing brands and since have a few G-loc pads I figured I’d add more to my parts stash. But I might try an entire new set up anyway.
 

TMO Supporting Vendors

Top