- 142
- 5
Hey guys I have a question. I have a 2013 Boss that I recently installed a FRPP rear seat delete and X-brace kit (same kit as Laguna Seca). When I put all my interior panels back together, I noticed that the interior quarter panel trim around the bottom of the quarter window doesn't seem to be quite as flush as it was before I installed the kit. I noticed that the trim can easily be pushed down, exposing the metal underneath (as if it isn't seating close enough to the quarter window). I tried pushing down trim on another mustang with rear seats, and the plastic cannot be pushed down like this. I cannot figure out how these panels could possibly be installed wrong, so anyone with a rear seat delete, is your trim the same way? The panels are held onto the body with only one clip and 3 push pins, so I'm guessing just the fact that the rear seats are not putting pressure on the panels is causing this. I'm hoping this is normal so I don't have to tear everything apart. Anyone have the same thing? Thanks!
Sorry for the shitty pics, its the best I've got.
Sorry for the shitty pics, its the best I've got.