Quick Install Boss 302S PCV Delete/Oil Separator/Breather For You Boss

[86blkgt]

Re: Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

Waiting on price also

 

[Jerry]

Re: Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

I'm in. Is it a easy install? Not mechanically gifted LOL!

 

[captdistraction]

Re: Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

In theory it would be. Tool-less install almost.

 

[Phantom]

Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

In for this.


Sent from my iPhone using Tapatalk 2

 

[Jerry]

Re: Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

In just let me know the price and where to send the cash!

 

[FrenchBoss]

Re: Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

Im in ;D...$ ???

 

[BOSS#3065]

Re: Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

Any price yet?

 

[BOSSCWO]

Re: Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

Please count me in also.

 

[sadil]

Re: Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

Im interested as well. Though the JLT piece is alright, the lines are too cheap, and the floating design is just not right.

 

[Z20WHAT]

Re: Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

Count me in, too, YellowBoss. Currently running JLT but like Sadil and others, NOT a fan of the dangling catch can...

 

[Fixy]

Re: Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

I'm in.

 

[copstang]

Re: Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

Interested...waiting on a price

Rob

 

[ArizonaBOSS]

Re: Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

Lotta people coming out of the woodwork!

 

[2012YellowBoss]

Re: Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

I am away from home, I will catch up with everybody this weekend.

 

[Boss2207]

Re: Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

Waiting on price. Email or PM once it is set.

 

[2012YellowBoss]

Re: Quick Install Boss 302S PCV Delete/Oil Separator/ Breather For You Boss

OK, getting ready to send out the first round after some delays getting all the parts. I am taking orders for the next round. Price is $335 shipped in the US. That price depends on getting the canisters off Amazon at the cheap price, if not you can pay the difference or I will refund you money.

If anyone is interested please PM me here and I will reply with the payment info. This is the list of people I have so far that have expressed interest.

jneuman
Phantom
FrenchBoss
BOSS#3065
BOSSCWO
sadil
Z20WHAT
Fixy
Boss2207

 

[2012YellowBoss]

The following thread has been updated with with this info. Please reply there or drop me a PM

https://trackmustangsonline.com/index.php?topic=4593.0

Here is a quick vid (s) on the installation of the canister kit. Raw video so no poking fun at me ;D Sorry it is in four parts, when I tried to combine these the audio was silent, watch in order. It was also a little difficult to do while holding the camera. Anyway I don't think it came out too bad except the four parts not being one. For those getting the first set of the canisters. I did not go into the clamps near the snap fitting in depth in the video. You will need to twist these around and tighten down the clamp once it is in a position you are happy with.

When finished start the car and let idle for five minutes before driving to reset the idle, no tune is needed.

Cost for the canister is $335 including shipping charges in the US. Canada will be $10-15 more, actual shipping charges only. There is a 3% paypal fee added if using that, I would rather a check or MO.

One change that will be made is the canister kit will come without the hoses attached, see picture one below. These hoses attach very easy, just screw on and snug in place. They do not need to be tightened hard. You can use a one inch wrench, adjustable wrench or pliers, use a cloth over the hose fitting if using pliers to avoid scratching the black finish. If you want the canister with the hoses attached, test fitted to my car and the clamps (where the hoses snap into place on the valve covers) positioned and tightened in place, it will be an extra $40 charge.

The $40 charge do not include the first group of canisters.

If there are any questions please let me know.

Vid will be up in a few minutes.
[youtube]http://www.youtube.com/watch?v=A2FDyRWmeLI[/youtube]
[youtube]http://www.youtube.com/watch?v=iW0KZnY5zcI[/youtube]
[youtube]http://www.youtube.com/watch?v=ee7GbzHu1-s[/youtube]
[youtube]http://www.youtube.com/watch?v=a39AiKaok5A[/youtube]

I hope I have covered everything but I am always ready for any questions. If any of you guys feel like reposting this on the other forums, feel free for anyone there interested.

 

[VoodooBoss]

Great job on the videos. All you need are some Ford Racing decals for the cans.

 

[ArizonaBOSS]

Excellent!

 

[cloud9]

Great vids Scott. I think there's a reasonable shot that even I can do it