Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!
Does this create any possible issues under the car with regards to heat etc? There are fuel lines on one side of the car close to the exhaust exit now in this mod right?
Fuel line is drivers side outside of the frame rail. Shouldn't be an issue I wouldn't think. Some reflective heat tape around it would be cheap insurance
I ran that for a couple of weeks when I yanked the QTPs. I didn't care for it much.....as the take off is right at the h-pipe I heard more "swirl and gurgle" than I like. After trying all combinations on the side pipes I prefer no discs or cut outs. Have been wondering what this setup might produce with headers tho....hoping to go to long tubes this summer.
Enjoy!......should make the neighbors pause to watch you roll by.
Haha, yeah it does sound pretty good in person. Just like a Boss with the baffles removed but louder and breathier.
There is no cutting required. You can remove the longer piece from the smaller piece by loosening a clamp. I had a shop create those down pipes. They bounce a bit, but not much. The clamps for the new pipes I bought from Borla. I dremeled a couple of slots in the down pipes to allow for room to squeeze.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.