The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Removal of rear seat coverings on an LS

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

PeteInCT

#LS-378 - So many Porsche's, so little time....
Moderator
2,848
14
Connecticut
They say idle hands are the devils playthings. I havn't made any changes to my LS in months so I decided to see if I can get her to lose a little weight. I've pulled all the plastic/carpeting out of the trunk. As for the rear seat area, I've removed the 4 visible plastic 'rivets' (top left/right and bottom left/right) but it still seems to be stuck in there really well. I want to be able to re-install it to stock form if needed so I'm hesitant to really yank on it good for fear of bending it up. Anybody done this before ?
 

Dig-It

Kevin
237
8
VA
I'm not at home right now or I'd look for you, but I remember seeing something about removing those pieces in the owner's manual or the Boss supplement.
 

TMO Supporting Vendors

Top